System | Bus | Ident. | DTC | Livedata | Actuators | Coding | Config |
---|
BVA/AT - Automatická převodovka
|
BVA 032F (VDIAG 10) | ISO | 0 | | 0 | 0 | | - |
BVA 6B35 (VDIAG 0C) | ISO | 0 | | 0 | 0 | | - |
Siemens DP0-TA2000 (VDIAG 08) | ISO | 0 | | 0 | 0 | | - |
Siemens DP0-TA2000 (VDIAG 0C) | ISO | 11 | | 35 | 1 | | - |
Siemens DP0-TA2000 (VDIAG 10) | ISO | 0 | | 0 | 0 | | - |
GPL/LPG - LPG
|
GAZ3000 (VDIAG 04, PROG AB) | ISO | 0 | | 0 | 0 | | - |
GAZ3000 (VDIAG 0C, PROG AB) | ISO | 0 | | 0 | 0 | | - |
GPL 2000 A8.50 (VDIAG 04, PROG A8) | ISO | 7 | | 25 | 2 | | 1/0 |
INJ/ECCS - Řídicí jednotka vstřikování/motoru
|
Bosch EDC15VM+ (VDIAG 04, PROG C2) | ISO | 4 | | 2 | 0 | | - |
Delphi DCM 1.2 (VDIAG 04, PROG 4C) | ISO | 12 | | 86 | 23 | | - |
Delphi DCM 1.2 (VDIAG 08, PROG 4C) | ISO | 12 | | 86 | 23 | | - |
Delphi DDCR (VDIAG 0C, PROG BE) | ISO | 0 | | 0 | 0 | | - |
Delphi DDCR (VDIAG 10, PROG BE) | ISO | 0 | | 0 | 0 | | - |
Delphi DDCR BE (VDIAG 08, PROG BE) | ISO | 0 | | 64 | 29 | | - |
Delphi DDCR BE (VDIAG 18, PROG BE) | ISO | 0 | | 0 | 0 | | - |
Delphi DDCR BE (VDIAG 20, PROG BE) | ISO | 0 | | 0 | 0 | | - |
Magneti-Marelli IAW 5NR (VDIAG 04, PROG 25) | ISO | 0 | | 60 | 12 | | - |
Sagem S2000 - A3 | ISO | 0 | | 0 | 0 | | - |
Siemens EMS 31.32 (VDIAG 15, PROG E0) | ISO | 8 | | 74 | 13 | | 19/0 |
Siemens EMS 31.32 / Sirius E1 (VDIAG 14, PROG E1) | ISO | 8 | | 74 | 13 | | 19/0 |
Siemens EMS 31.32 / Sirius E1 (VDIAG 15, PROG E1) | ISO | 8 | | 74 | 13 | | 19/0 |
Siemens SIM32 (VDIAG 44, PROG D3) | CAN | 8 | | 92 | 6 | | 10/0 |
Siemens Sim 32 (VDIAG 04, PROG D4) | ISO | 8 | | 81 | 16 | | 2/0 |
Siemens Sirius 34 E553 (VDIAG 08, PROG E5) | ISO | 7 | | 94 | 32 | | 5/0 |
Siemens Sirius 34 E553 (VDIAG 09, PROG E5) | ISO | 7 | | 94 | 32 | | 5/0 |
Siemens Sirius 34 E5B0 (VDIAG 0D, PROG E5) | ISO | 7 | | 94 | 32 | | 5/0 |
Siemens Sirius 34 E932 (VDIAG 08, PROG E9) | ISO | 0 | | 0 | 0 | | - |
No ECUs in this category.
Errors and omissions excepted.